Digital
Recording - now
you can thanks to the Vetta Digital Interface (VDI for short). Why?
Because every
Vetta ever built includes an expansion slot that can accommodate the
Vetta Digital Interface (see
photos above). By
installing the VDI, your
Vetta will have extensive digital audio input and output
capabilities. This digital audio interface can operate at 16, 20, or 24-bit
resolution, and at sample rates up to 96KHz.
| Selectable
Parameters |
|
Sample
Rate/Resolution
44.1/16
48/16
88.2/16
96/16
44.1/20
48/20
88.2/20
96/20
44.1/24
48/24
88.2/24
96/24
MATCH S/PDIF |
Digital
Out Selection
AES/EBU
or S/PDIF |
|
|
Digital
Out Source
Normal
(outputs what the directs do), Dry (pickup only), and Loop
(for using a digital external fx processor in the loop). |
|
Digital
Gain
-12dB to +12 dB |
ghj
Digital Connections
- connections are
provided for both AES/EBU and S/PDIF digital audio inputs and
outputs and the digital audio connections can be used for direct digital
recording, as a digital effects loop, or for digital “re-amping”
with a computer recorder or DAW. This
technique allows you to change any of your amplifier or effects
settings after you have recorded them.
ghj
Digital Re-Amping -
with
the VDI, you can route your dry, direct guitar signal out the
digital outputs while simultaneously sending it through all of its
amp and effects models.
The direct outputs can be recorded to your computer/DAW/tape
recorder at the same time as the direct digital dry signal.
When your finished recording, send the dry track back to
Vetta II’s digital inputs.
Now, if you’re not satisfied with the tone that you
recorded, you can change it in Vetta II and send the signal back out
its digital outputs to your recorder, without ever leaving the
digital domain. The VDI's digital inputs can be used to send any
digital audio signal through its vast collection of
amplifiers, cabinets, and effects.
ghj
Variax Connections -
The Vetta Digital Interface also adds a Variax input.
This input is able to provide direct power for Variax,
bi-directional communication between Vetta and Variax, plus a
digital audio connection from Variax to Vetta. With this connection, it’s possible to not only have your
amps, cabs, effects, and routing change with the touch of a button,
but now your guitar can as well. A
Few Digital I/O Menu Screens
|
